en

LED Beam Moving Head Light

1 Input & 8 Output and 2 Input and 4 Output of 2modes DMX Splitter


  • Item No.:

    LCM003-RDM 4 DMX Spl
  • Product Details

●  Specification

. The overall aluminum alloy die-casting process has a novel appearance and unique design.

. Semi-circular groove design for easy suspension diretly on the truss 

. supporting RDM function

. IP65 waterproof design (not waterproof optional)

. 1 input interfaces, 4 output interfaces

. Standard DMX512 digital signal

. DMX signal shaping, amplification, optimizing DMX signals, extending DMX signal


●  transmission distance

. DMX signal distribution function, multi-line DMX interface sharing a control system

. Using photoelectric high voltage isolation technology, the isolation voltage between each input and output port is more than 1000V

. using Seetronic XLR

. Wide range of voltage design:100V~240V 50-60HZ

Send A Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
related products
Wireless DMX transceiver
Wireless DMX Transceiver 2.4G Global Open ISM Band
LED control.It uses 2.4G global open ISM band with license-free use. Due to efficient GFSK modulation, high-speed frequency hopping (FHSS) communication design, and anti-interference ability,it good for wireless DMX solution.
COB LED Par Light
LCE064-COB RGBWA+Rin
COB LED RGBWA Par light.It uses 1x200W RGBWA COB LED& LED ring of 96x0.2W RGB LEDs and all-aluminum alloy structure.Besides owning beam angle of  45° and following RDM&Artnet&DMX control protocols.
LCA029-1930RGBWZ
LCA029-1930RGBWZ
The design is unique and generous. The LED uses the honeycomb concept, which makes it a leader in the LED moving head industry. The honeycomb is a high-performance LED moving head with both beam and wash, and unique effect light p, 4 ~ 60 degree  zoom, from beam to wash free switch. Each LED  can be individually controlled to create a colorful effect. The lens can be rotated in both directions without polarity, and its effect opens and closes like a flower petal through the combination of color and dynamic graphics. Light pillar guides light, so that each of the different colors of the LED, have their own different colors of the  beam light .
280W Beam Moving Head Light
LCB001-280BEAM+Ring
The original Philips 280W 10R lamp is used as the light source and 64*0.2 W RGB LEDs are used as the light source. The beam angle is 2 ° and the angle of the light output is 110 °
LCD004_Magic1
LCD004_Magic1
The LCD004_Magic1 is a rugged, versatile, two-sided multifunction effect moving head light with 4x 60W RGBW leds at the front for powerful beam and wash effects with smooth zoom from 4-40° and individual control for each LED. 36 x1W CW leds, 72 x0.5W RGB leds and 9 x10W CW leds at the back,which produce the strobe and beam control in 24 zones, provides rich, saturated mixed colors and point-to-surface lighting effects. The dynamic strobe coverage of the pixel strobe end can be up to 115° wide, and the beam end of the same surface can produce a sharp beam of 3.5°, thus showing a well-defined hollow beam. In addition to DMX control, there is a powerful RDM two-way control technology.
Battery/Chargeable Bar
LCE077-Battery Bar
outdoor LED Battery Bars.1m/0.5m LED Bars uses 18 or 8x8W RGBW LEDs controlled individually,Besdies owning high-capacity lithium battery,IP65 calss IR remote controller& beam angle of 25° and following RDM&DMX control protocols.
600W Hybrid Moving Head Light
LCA050-600BSW
LED Hybird moving head light.It is with CMY+CTO uses 1x600W white LED and owns color temperature 7000K,4 -35° linear zoom,CMY+color wheel and linear CTO.Besides following RDM,DMX and Artnet control protocol
Send A Message
welcome to Rainstar
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact